Flexible Warm Edge Spacer Butyled Spacer bar For Insulating Glass
and edge spacer double glass windows
Butyled Spacer bar Description
1. Butyled Spacer bar is composed of aluminum strip, plastic heat insulation strip and
aluminum foil,
the tensile strength is greatly improved, use one product to do the
whole job instead of several components, such as aluminum
spacer bar, molecular sieve and so on, so the production speed is
fast and saves much cost.
2. Polymer adhesives and tackifiers ensure perfect sealing
performance.
3. The unique formula makes the properties of the sealing spacer
not change according to temperature and humidity.
4. The high percentage of desiccant within the product completely
absorbs the moisture in the air between the glasses, and its
strong drying capability ensures that there will be no condensation
between insulated glasses even at -60℃.
5. Vacuum-packed with aluminum foil, with indicator card is
available inside. The products are packed with composite vacuum
foil
in four layers, and the indicator card shows the
moisture-absorption performance.
Product Name | Insulating Glass Butyl Spacer |
Application | Insulating Glass, Double Glazing Glass, Triple Glazing Glass, Glass
Panel, Window, Door |
Color | White, Black, Gray, Silver, Gold |
Specification | 6A-22A |
Length |
see below details |
Function | Edge Protection, Seal, Sound Reduction, Heat Insulation |
Use Manufacturing building doors and windows,Train,Bus,insulating
glass ,insulating door, shutter,Refrigeration equipment and so on.
Using method and attention All the glass should be dry and clean.
The insulating glass should be made by the following steps.
1. Putting the spacer onto the corner of one glass, then making the
spacer straight, at the same time keeping the spacer around the
surface of the glass, at the end, reserved 2.5mm– 3.0mm to the edge
of the glass and the spacer should be reserved about 20mm more
joint the pact pressing the joint, making no space in the circle.
2. Then putting another glass onto the one which has the spacer
above, making sure the two pieces of glass are mutual alignment in
both vertical and horizonal.
3. Putting them into the hot press machine with the temperature
between 110–140Š inside and 50~60Šthe outlet.
4. According to the structure requirement of the insulating glass,
two component silicone sealant could be putting outside of the
spacer. Then a piece of insulating glass should come out.
5. The butyl spacer must be carried out in accordance with this
attention otherwise may cause the seal leakage.
Q: Are you trading company or manufacturer ?
A: Yes we are Butyled Spacer bar factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods have stock. or it will
takes 10-20 days to produce according you order quantity ,
Q: Do you provide Butyled Spacer bar samples ? is it free or extra
?
A: Yes, we could offer the Butyled Spacer bar sample for free,
buyer afford the cost of freight.
Q: What is your terms of payment ?
A: LCL, 100% in advance. FCL 30% T/T in advance ,balance by copy of
BL
